a lab-scale cross flow membrane bioreactor (cf-mbr) was operated to determine the biokinetic coefficients under mlss concentrations of 5000 and 3000 mg/l. the investigation showed that the yield (y), the endogenous decay coefficient (kd), the maximum specific growth rate (μm) and the saturation constant (ks) were 0.276 mg/mg, 0.07 /day, 0.653 /day, and 396.62 mg cod/l respectively for mlss 5000...

in the present study, the production of low-salt water from salty water by nanofiltration as well as membrane fouling was investigated. furthermore, a new method was proposed and tested experimentally for creating the backpulse in order to minimization of fouling and increase of the filtration efficiency. in the proposed method, the permeate was used instead of gas for creating the backpulse. t...

a lab-scale cross flow membrane bioreactor (cf-mbr) was operated to determine the biokinetic coefficients under mlss concentrations of 5000 and 3000 mg/l. the investigation showed that the yield (y), the endogenous decay coefficient (kd), the maximum specific growth rate (μm) and the saturation constant (ks) were 0.276 mg/mg, 0.07 /day, 0.653 /day, and 396.62 mg cod/l respectively for mlss 500...

the study of interactions of jet into cross flow at different longitudinal and transverse angles ofjet was studied. the following components were designed and constructed: a low velocity windtunnel to produce the uniform flow, a flat plate with a traverse injection system to simulate the jetinjection, and a spatial rake to measure the total pressure. the tests were carried out atlongitudinal (α...

an optimal design and fabrication of compressors requires flow investigation through the compressor components. flow field inside the volute is fully three dimensional and turbulent. better understanding of flow mechanism leads to improve the volute design procedure. in this research the experimental and numerical flow investigation through a radial flow compressor volute are performed to recog...

In this paper, for a given compact 3-manifold with an initial Riemannian metric and symmetric tensor, we establish the short-time existence uniqueness theorem extension of cross curvature flow. We give example flow on manifolds.

in this paper, analysis of fluid flow and heat transfer over the bank of tubes is considered. k-ω sst model is applied for simulation of turbulent flow. in this paper, the improvement of efficiency of a bundle of circular tubes by changing the shape of the cross section of one row of the pipes to the elliptical cross section as an innovative plan is considered. as know, friction factor in turbu...